Explanation Of Symbols And Signs; Safety Information - GEM 1230 Installation, Operating And Maintenance Instructions

When dealing with harmonised European
norms, standards and guidelines, these
apply within the Single European Market.
The operator must also adhere to national
rules and guidelines, if applicable.
The descriptions and instructions in these
installation, operating and maintenance
instructions refer to the standard version.
The safety information does not take into
account:
Unexpected incidents and events, which

may occur during installation, operation
and servicing.
Local safety regulations which must be

adhered to by the operator and by any
additional installation personnel.
If you have any questions, please do not
hesitate to ask your closest GEMÜ sales
office.
1.2 Explanation of
symbols and signs
Important information is identified in these
installation, operating and maintenance
instructions by the following symbols:
DANGER
Imminent danger!
Non-observance will lead to death or
®
severe injury.
WARNING
Potentially dangerous situation!
Non-observance can cause death or
®
severe injury.
CAUTION
Potentially dangerous situation!
Non-observance can cause moderate
®
to light injury.
CAUTION (WITHOUT SYMBOL)
Potentially dangerous situation!
Non-observance can cause damage to
®
property.
Hand: indicates general informa-
tion and recommendations.
Bullet point:indicates the tasks to
G
be performed.
Arrow: indicates the response(s) to
®
tasks.
Enumeration sign

1.3

Safety information

Please observe the items listed in this
G
safety information, the existing national
and European accident avoidance
regulations and any existing operator's
internal working, operating and safety
guidelines.
Assembly, electrical connection and
G
commissioning only by qualified and
trained personnel.
Use qualified personnel for operation,
G
servicing, inspection and assembly.
The operator must define precisely the
G
areas of responsibility, the monitoring of
personnel and their competence areas.
Train personnel with insufficient
G
knowledge or, if necessary, have them
trained by the manufacturer / supplier on
order of the operator.
The operator must ensure that the
G
contents of the installation, operating and
maintenance instructions have been fully
understood by the personnel.
Ensure that the power supply equipment
G
is electrically safe.
Observe the electrical data.
G
If the safety information is disregarded
persons, the environment and the

electrical position indicator may be
endangered.
this may lead to a complete loss of claims

rights.
17 / 32
1230