CAUTION 6. Define the areas of responsibility. 7. Observe the safety data sheets. Potentially dangerous situation! 8. Observe the safety regulations for the media used. ▶ Non-observance can cause moderate to light injury. GEMÜ 1205 4 / 20 www.gemu-group.com...
IP65. The connection is designed as M20. Installation, operation and servicing The GEMÜ 1205 is used to indicate and check the position of must only be carried out by qualified trained personnel with a valves operated with pneumatic linear actuators.
The order data provide an overview of standard configurations. Please check the availability before ordering. Other configurations available on request. Note: Mounting kit 1205 S01 Z...AT dependent on valve type. Please order separately specifying valve type, DN, control func- tion and actuator size.
Fitted electrical position indicator 4. Do not store solvents, chemicals, acids, fuels or similar ▶ Destruction of the electrical position indicator when dis- fluids in the same room as GEMÜ products and their assembling the valve body spare parts. Disassemble the electrical position indicator before dis- ●...
● foothold. 2. Screw in guide piece 3 using the wrench surface. Prior to commissioning, ensure that ● the cover is fully closed and that the housing and the O-ring are not dam- aged. GEMÜ 1205 10 / 20 www.gemu-group.com...
Page 11
21. Use a screw M4x6 to attach the potential equalisation to position: position: the electrical position indicator. ð Potential equalisation for metal housings in poten- tially explosive areas at least 4 mm²: 22. Secure the connection against working itself loose. www.gemu-group.com 11 / 20 GEMÜ 1205...
Page 12
28. For function control, open and close the valve and pay at- tention to signalling. 29. If the settings need to be readjusted, disconnect the elec- trical position indicator from the power supply and repeat step 7 to step 26. GEMÜ 1205 12 / 20 www.gemu-group.com...
Voltage is not Connect voltage No spare parts are available for this product. If it is faulty, connected please return it to GEMÜ for repair. Cover cannot be Sealing ring Insert sealing ring 12.2 Setting the limit switches attached...
Returned goods can be processed only when this note is completed. If no return delivery note is included with the product, GEMÜ cannot process credits or repair work but will dispose of the goods at the operator's expense.
Description of the product: Electrical position indicator GEMÜ 1205 Marking – 1205 000 Z AL A00 03 00 M2 M2 X – 1205 000 Z AL A01 03 00 M2 M2 X – 1205 000 Z AL A02 03 00 M2 M2 X EC type examination certificate IBExU18ATEX1008.