Manufacturer's Information; Delivery; Packaging; Transport - GEM 1231 Operating Instructions Manual

9 Manufacturer's information

9.1 Delivery

● Check that all parts are present and check for any damage immediately upon receipt.
The product's performance is tested at the factory. The scope of delivery is apparent from the dispatch documents and the
design from the order number.

9.2 Packaging

The product is packed in a cardboard box which can be recycled as paper.

9.3 Transport

1. Only transport the product by suitable means. Do not drop. Handle carefully.
2. After the installation dispose of transport packing material according to relevant local or national disposal regulations /
environmental protection laws.

9.4 Storage

1. Store the product free from dust and moisture in its original packaging.
2. Avoid UV rays and direct sunlight.
3. Do not exceed the maximum storage temperature (see chapter "Technical data").
4. Do not store solvents, chemicals, acids, fuels or similar fluids in the same room as GEMÜ products and their spare parts.

10 Assembly and installation

Fitted electrical position indicator
▶ Destruction of the electrical position indicator when disassembling the valve body
Disassemble the electrical position indicator before disassembling the valve body
●
Observe the data on the product labels, product documentation and the EC type examination certificate.
●
Connect cable carefully, do not damage individual wires.
●
Prepare the wire ends when connecting several cables or fine-wired cables.
●
Always attach wire end ferrule stops using pinch tools to achieve consistent quality.
●
Tighten all clamping points, even the ones not being used.
●
1. Observe the national regulations and provisions.
2. Observe the installer provisions.
3. Protect M12 plugs against electrostatic build-up.
4. Protect M12 plugs against damage.
5. Lay cables securely and protect them from damage.
6. Differential voltage for two intrinsically safe electric circuits: maximum 30 V.
7. Connect open wire ends in a junction box with protection class IP20 and higher or outside the EX area.
www.gemu-group.com
CAUTION
NOTICE
11 / 24
10 Assembly and installation
GEMÜ 1231