Setting The Address Jumper (J 1) - IBM RT User's Setup Manual

S e ttin g the Address Jum per (J l)
The following table shows the address ranges provided by jumper
J 1. If two IBM RT PC SCSI A dapters are used, one must be
configured in the Prim ary J 1 position and the other in the
A lte rn a te J 1 position. A single ad ap te r can be configured for
either address range.
Note:
Ensure th a t address ranges do not conflict with other
adapter options. Refer to "Conflicting Memory Addresses" on
page 1-19 for more information.
J l P o s i t i o n A d d r e s s R a n g e
P rim a ry 0D 50 - 0D 5F
A lte r n a te 0950 - 095F
Section 8. Additional Options
8-11