Installing Additional Options - IBM RT User's Setup Manual

Installing Additional Options

8-4 Options Installation
CAUTION
Before doing any procedure, turn off power on the
system unit and all connected devices, and unplug system
unit and device power cables from electrical outlets.
Refer to "Safety Notice Translations" on page iii.
If you have not removed the covers, see "Removing the Covers
From the System Units" on page 1-4.
Refer to "General Instructions" on page 34 when necessary for
information on installing adapters.
After all options have been installed, it is important to complete
the checkout procedure in Section 9, "Checking Out the Option
Installation."