Display (IBM 5081)
•
For color displays, connect the three color-coded connectors on
the RGB video cable to matching input receptacles on the
interactive display. Plug the other end of the RGB video cable
into the 3-pin connector on the IBM Megapel Display Adapter.
Note: View-only displays can be connected to three
color-coded output receptacles provided on the back of the
interactive display.
Warning:
Do not connect IBM 5081 displays to the
convenience outlet on the back of the IBM RT PC; the
system unit will be damaged.
Ensure that the display power switch is off. Then connect the
power cable, first to the display and then to a
outlet.
The monochrome display uses only the green lead on the RGB
•
video cable. This lead is connected to the matching input
receptacle on the interactive display. Plug the other end of the
RGB video cable into the 3-pin connector on the IBM Megapel
Display Adapter.
Note: View-only displays may be connected to the greeen
output receptacle provided on the back of the interactive
display.
Warning:
Do not connect IBM 5081 displays to the
convenience outlet on the back of the IBM RT PC; the
system unit will be damaged.
Ensure that the display power switch is off. Then connect the
power cable to a
grounded wall outlet.
grounded wall
Section 2. Connecting Devices 2-21