IBM RT User's Setup Manual page 216

Hide thumbs Also See for RT:
Table of Contents

Advertisement

10. Set the jumpers on the drive adapter according to which drive
you are installing:
If you are using R40 fixed-disk dri ves, refer to "IBM
Personal Computer AT Fixed-Disk and Diskette Drive
Adapter" on page 2-53.
Warning:
The jumpers on the IBM Personal Computer
AT Fixed-Disk and Diskette Drive Adapter must be reset
if the adapter was previously installed in adapter slot 1.
If you are using R70 fixed-disk drives, refer to "IBM RT PC
FSDI Magnetic Media Adapter" on page 2-54.
Warning:
The jumpers on the IBM RT PC ESDI
Magnetic Media Adapter must be reset if the adapter
was previously installed in adapter slot 1.
If you are using E or 310 megabyte fixed-disk drives, first
remove the IBM RT PC Extended ESDI Magnetic Media
Adapter as shown in Step 10, page 2-30. If you wish to
change adapter slot positions, refer to the illustration that
accompanies Step 13 on page 2-32. Note which version
adapter you have, and set Jumper .16 as shown.
Warning:
Jumper .16 on the IBM RT PC Extended
ESDI Magnetic Media Adapter must be set according to
which adapter slot is used. Refer to the illustration on
page 2-32 to set Jumper .16.
Section 2. Removing and Installing Drives in IBM 6150
2-41

Advertisement

Table of Contents
loading

Table of Contents