Installing Memory Options
5-4 Options Installation
CAUTION
Before doing any proced ure, turn off power on the
system unit and all co nne c te d de vices, and unplug sy s tem
unit and device power cables from electrical outlets.
Refer to "Safety Notice T r a n sla t io n s" on page iii.
If you have not removed the covers, see "Removing the Covers
From the System Units" on page 1-4.
Memory option slot assignments differ, depending on which
memory option or combination of memory options you choose.
Refer to "General Instructions" on page 3-4 when necessary for
information on installing adapters.
After all options have been installed, it is important to complete
the checkout procedure in Section 9, "Checking Out the Option
Installation."