Address Range Switches - IBM RT User's Setup Manual

Address Range S w it c h e s
The address switches allow up to eight 8-port adapters to be
addressed. Adapter switches must be set so that no address gaps
exist, and the switch settings must agree with the number of
adapters used. That is, the first adapter installed must use the
settings shown for Adapter 1, the second adapter the settings
shown for Adapter 2, and so on through Adapter 8.
Use an opened paper clip or a ball-point pen to set the address
switches as shown below.
You can install
In sta llin g :
3, 4, 5, 6, 7, or 8 in
IBM
in slots 1, 2, 3, 4, 5, or 6 in the
diagram or 6192 installation instructions for the adapter slot
IBM
locations.
Section 6. Communication and Network Adapter Options
8-port adapters in adapter slots 2,
IBM
6150, in slots 1, 2, 3, 4, or 5 in
6192. See the system unit
IBM
AJZIF202
6151 or
IBM
6-41