Configuration - Adding Vrf Instance - Avaya 8800 Technical Configuration Manual

3.1 Configuration – Adding VRF Instance
For this configuration example, we will configure ERS8000-1 using ACLI and ERS8000-2 using CLI.
3.1.1 Optional SNMP Configuration – Software release 5.x
Only complete this section if ERS8000-1 and 8600-2 have software level 5.x and only if you wish to use
JDM to limit access to a specific VRF instance. Otherwise, please continue to the next section.
3.1.1.1 Create VRF SNMP user using CLI
In this example, we will create three SNMPv3 users with the following characteristics:
VRF User
Name
VRF0 vrf0user
VRF1 vrfone
VRF2 vrftwo
ERS8000-1 Step 1 – Load the SNMPv3 AES encryption module
ERS8000-1:5(config)# load-encryption-module AES
ERS8000-2 Step 1 – Load the SNMPv3 AES encryption module
ERS8000-2:5# config load-encryption-module AES
ERS8000-1 Step 2 – Add SNMP-v3 Super User. For this example, we will add user 'vrf0user' to
USM group named 'group_1'
ERS8000-1:5(config)# snmp-server user vrf0user md5 user1234 aes userpriv
ERS8000-1:5(config)# snmp-server user vrf0user group group_1
ERS8000-1:5(config)# snmp-server group group_1 "" auth-priv read-view org write-view
org notify-view org
ERS8000-2 Step 2 – Add SNMP-v3 Super User. For this example, we will add user 'vrf0user' to
USM group named 'group_1'
ERS8000-2:5# config snmp-v3 usm create vrf0user md5 auth user1234 priv-prot aes priv
userpriv
ERS8000-2:5# config snmp-v3 group-member create vrf0user usm group_1
ERS8000-2:5# config snmp-v3 group-access create group_1 "" usm authPriv
ERS8000-2:5# config snmp-v3 group-access view group_1 "" usm authPriv read org write
org notify org
VRF-Lite for Ethernet Routing Switch 8600 Technical Configuration Guide
April 2011
Context Authentication
Name
Protocol
MD5
vrf1 MD5
vrf2 MD5
Privacy
Password Protocol
User1234 AES
vrf1user AES
vrf2user AES
avaya.com
Password
userpriv
vrf1priv
vrf2priv
28