With Heavy-Duty Anchor; With Ground Anchor; Dismount The Post Roof; Open The Post - TCS AMI Series Product Information

01/2013

... with heavy-duty anchor

 Use the base plate of the post as stencil to
mark the drill holes.
 Drill and clean drill holes.
 Drive the heavy-duty anchor flush into the foun-
dation.
 Insert the connection cable provided by cus-
tomer as well as the earthing through the base
plate of the post.
 Fix the base plate with 4 cheese-head screws with a key for hexagon socket screws 8 mm (not
enclosed in the delivery / length of the screws see the illustration above).
!
Ensure that the connection cable provided by customer is not clamped or damaged!

Dismount the post roof

Open the post

TCS TürControlSysteme AG, TCS Hotline Germany: hotline@tcsag.de
Fax: +49 (0) 41 94 / 9 88 129  www.tcsag.de
post corpus
cheese-head
screws M10x75
base plate
heavy-duty anchor
countersunk screw
post roof
upper back panel
knurled screw
profile
11

... with ground anchor

 Concrete the ground anchor vertically in
the ground, concrete height 20 mm below
the upper edge of the ground anchor.
 Remove the protection caps.
 Insert the connection cable provided by
customer as well as the earthing through
the ground anchor and the base plate of
the post.
 Loosen and remove the 4 countersunk
screws in the post roof with the en-
closed allen key.
 Remove the roof of the post.
 Put down the roof on clean ground.
 Loosen the two knurled screws which are lo-
cated on top in the inside of the post corpus.
 Push out the upper back panel.
cheese-head screws
M10x30
(encluded in the
delivery ground
anchor)
ground anchor
20 mm distance
concrete height
Subject to technical changes.
PI_AMI1xx00_uk