Ethernet Routing Switch 8302 Ac Power Supply Specifications - Avaya Ethernet Routing Switch 8300 Series Installation Manual

Ethernet Routing Switch 8302 AC power supply
specifications
The following table lists the power specifications for the 8302 AC power supply.
Table 13: Ethernet Routing Switch 8302 AC power specifications
Input voltage range (nominal):
Input current (nominal):
Frequency range (nominal):
Input VA
Input power consumption:
Heat dissipation (thermal/output):
Hold-up time:
Max. output power (combined):
Non-PoE:
PoE:
Fans:
Note the following information:
• The maximum steady-state output power is limited to a total of 850 W for any combination
of output voltages/currents at low-line 100-120 VAC nominal input voltage conditions.
• The maximum steady-state output power is limited to a total of 625 W for any combination
of output voltages/currents, excluding the 50 VDC source at low-line 100-120VAC nominal
input voltage conditions. This limitation is required to ensure that there is sufficient PoE
power or 225 W total at this input voltage condition.
• The maximum steady-state output power is limited to a total of 950 W for any combination
of output voltages/currents, excluding the 50 VDC source at high-line 200-240VAC
Installation — Chassis

Ethernet Routing Switch 8302 AC power supply specifications

AC Input Power Ratings
100-120 VAC
12 A
50-60 Hz
1192 VA
1180 W
1126 BTU/hr
20 ms
DC Output Power Ratings
850 W (760 W + 90 W
fans)
3.3 VDC @ 150 A
12 VDC @ 65 A
50 VDC @ 18 A
12 VDC @ 7.5 A
200-240 VAC
9 A
50-60 Hz
1768 VA
1750 W
1195 BTU/hr
20 ms
1400 W (1310 W + 90 W
fans)
3.3 VDC @ 150 A
12 VDC @ 65 A
50 VDC @ 18 A
12VDC @ 7.5 A
May 2011 63