Ethernet Routing Switch 8005Dc Power Supply Specifications; Ethernet Routing Switch 8005Di Dc Power Supply Specifications - Avaya Ethernet Routing Switch 8300 Series Installation Manual

Technical specifications
nominal input voltage conditions. This limitation is required to ensure maximum PoE
power or 450 W total for the 50 VDC source at this input voltage condition.
• To obtain the full output power rating of 1400 W, you must connect the power supply to a
nominal (200-240VAC) input voltage source.
Ethernet Routing Switch 8005DC power supply
specifications
This section provides power ratings for the 8005DC power supply.
The following table lists the DC input power specifications.
Input voltage
Input current (nominal)
Input VA (maximum)
Input power consumption
Heat dissipation (thermal/output)
The following table lists the DC output power specifications.
Output power (maximum)
Modules
Fans
Mean time before failure (MTBF)
Ethernet Routing Switch 8005DI DC power supply
specifications
This section provides power ratings for the 8005DI DC power supply.
The following table lists the DC input power specifications.
64 Installation — Chassis
Parameter
Parameter
Specifications
–48Vdc/–60Vdc
42 A /34 A
1.95 kVA
1950 W
1666 Btu/hr
Specifications
1462 W (1372 W + 90 W fans)
3.3 V @ 150 A
12 V @ 72 A
12 VDC @ 7.5 A/ 24 A peak
108 803 hr (Bellcore TR–332 standard)
May 2011