Xr-300M Eec Mechanical Stability (In Operation); Product Group X-300M Poe; Approvals; X-300M Poe Approvals, Certificates - Siemens SCALANCE X-300 Series Operating Instructions Manual

Certifications and approvals

11.6 Product group X-300M PoE

11.5.1.4

XR-300M EEC mechanical stability (in operation)

The devices of the SCALANCE XR-300M EEC product group meet the following standards
(prerequisite: rack mounted with 4 securing points):
● IEC 60068-2-6
(vibrations during transportation and operation)
Test parameters:
5 – 9 Hz: 3.5 mm
9 – 150 Hz: 1 g
1 octave/min, 20 sweeps
● IEC 60068-2-27
(shocks during operation)
Test parameters:
15 g, 11 ms duration
6 shocks per axis
● IEC 60068-2-6
(vibrations during transportation)
Test parameters:
10 – 58 Hz: 0.075 mm
85 – 150 Hz: 1 g
1 octave/min, 20 sweeps
11.6 Product group X-300M PoE
11.6.1

Approvals

11.6.1.1

X-300M PoE approvals, certificates

Approvals issued
Note
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product. You
can check which of the following approvals have been granted for your product by the markings
on the type plate.
Approvals for shipbuilding are not printed on the device type plate.
280
Operating Instructions, 11/2019, A5E01113043-24
SCALANCE X-300