X-300Eec Product Group; Approvals; X-300Eec Approvals And Certificates - Siemens SCALANCE X-300 Series Operating Instructions Manual

11.4

X-300EEC product group

11.4.1

Approvals

11.4.1.1

X-300EEC approvals and certificates

Approvals issued
Note
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product. You
can check which of the following approvals have been granted for your product by the markings
on the type plate.
The term "the product" as used below includes all device variants of the SCALANCE X‑300EEC
unless specific variants are expressly named for an approval.
EC directives
SIMATIC NET products meet the requirements and aims of the following EC directives.
Low voltage equipment directive
Devices supplied with 100 to 240 VAC meet the requirements of the directive 2006/95/EC
"Electrical Equipment Designed for Use within Certain Voltage Limits" (Low Voltage Equipment
Directive). Conformity attested by compliance with the standard EN 60950-1:2010.
EMC directive (electromagnetic compatibility)
The SIMATIC NET products described in these operating instructions meet the requirements
of EC directive 2004/108/EC "Electromagnetic Compatibility" for the following areas of
application:
Field of application
Industry
Machinery directive
The product is a component in compliance with the EC Machinery Directive 2006/42//EEC.
According to the machinery directive, we are obliged to point out that the product described is
intended solely for installation in a machine.
SCALANCE X-300
Operating Instructions, 11/2019, A5E01113043-24
Emission
EN 61000-6-4 : 2007
Certifications and approvals
11.4 X-300EEC product group
Requirements
Immunity to interference
EN 61000-6-2 : 2005
269