Xr-300M Technical Specifications; Construction, Installation And Environmental Conditions - Siemens SCALANCE X-300 Series Operating Instructions Manual

Technical specifications

8.4 XR-300M technical specifications

Note
The following applies to IE Switches X-300:
The number of IE Switches X-300 connected in a line influences the frame delay time. When
a frame passes through the switch, this is delayed by the Store&Forward function of the
IE Switch X-300 by the following values:
● at 64 bytes frame length: Delay of approx. 10 microseconds (at 100 Mbps)
● at 1500 bytes frame length: Delay of approx. 130 microseconds
(at 100 Mbps)
This means, the more IE Switches X-300 a frame runs through, the higher the frame delay.
PRP compatibility
Device variant
X308-2M
X308-2M TS
* Information about the firmware version (V) as of which PRP is supported.
Note
For a device to be used in PRP networks, it must be able to process a frame length of at least
1528 bytes (Jumbo Frames). This value is the maximum frame length including VLAN tag of
1522 bytes plus the length of the PRP trailer of 6 bytes. The following table shows the version
as of which the devices are PRP-compatible.
8.4 XR-300M technical specifications
Note
Validity of the technical specifications
All the technical specifications described in this section that is not assigned to a specific device
variant, version or a media module, apply to all device variants/versions of the product group.
8.4.1

Construction, installation and environmental conditions

Table 8-26
Device version
(power supply)
2 x 24 VDC
1 x 100 to 240 VAC
166
Construction
Dimensions (W x H x D)
483 × 44 × 305 mm
483 × 44 × 305 mm
As of version *
V3.7.0
Weight
5500 g
5900 g
Operating Instructions, 11/2019, A5E01113043-24
Degree of protec‐
tion
IP20
IP20
SCALANCE X-300