Certifications and approvals
11.5 XR-300M EEC product group
11.4.1.4
Mechanical stability
All variants of the IE Switch SCALANCE X‑300EEC meet the following requirements for
mechanical stability:
● IEC 60068-2-6 (vibration)
5 – 9 Hz: 3.5 mm
9 – 150 Hz: 1 g
1 octave/min, 20 sweeps
● IEC 60068-2-27 (shock)
15 g, 11 ms duration
6 shocks per axis
For further details, refer to the technical specifications.
11.5
XR-300M EEC product group
11.5.1
Approvals
11.5.1.1
XR-300M EEC approvals, certificates
Approvals issued
Note
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product. You
can check which of the following approvals have been granted for your product by the markings
on the type plate.
EC directives
SIMATIC NET products meet the requirements and aims of the following EC directives.
Low voltage equipment directive
Devices supplied with 100 to 240 VAC meet the requirements of the directive 2006/95/EC
"Electrical Equipment Designed for Use within Certain Voltage Limits" (Low Voltage Equipment
Directive). Conformity attested by compliance with the standard EN 60950-1:2010.
274
Operating Instructions, 11/2019, A5E01113043-24
SCALANCE X-300