Download Print this page

Hoshizaki KM-340MAH Manual page 21

Cleaning & sanitizing
Hide thumbs Also See for KM-340MAH:

Advertisement

Need Service or Repair? Locate your closest Hoshizaki Certified Service Tech: hoshizakiamerica.com/locate-service-rep
In
In bad water conditions, a more thorough cleaning may
b
be required. Move
control switch
the power supply. Dilute 5 oz. of Scale Away to 1
gallon of warm water. Remove and clean the float
switch assembly*, water supply tubes, spray tubes,
and spray guides. Rinse thoroughly, then replace in
their correct positions. Turn the power supply back on.
Otherwise, continue to Step
*
Remove retainer rod (take care not to bend excessively) from bottom of the
float switch housing & clean all float parts.
R
Replace all the Panels, except the Front Panel.
M
Move the
service switch
switch
to SERVICE. Replace the Front Panel.
A
After 30 minutes, remove the Front Panel, move the
service switch
to DRAIN. Replace the Front Panel.
ATTENTION! To prevent damage to the water
pump, do not leave the control switch on SERVICE
for extended periods when water tank is empty.
Cleaning Rinse:
A
After 2 minutes, remove the Front Panel, move the
control switch
to ICE. Replace the Front Panel.
After 3 minutes, move the
A
the
control switch
to SERVICE. Replace the Front Panel.
A
After 5 minutes, remove the Front Panel, move the
service switch
to DRAIN. Replace the Front Panel
After 2 minutes, remove the Front Panel, move the
A
switch
to OFF.
Repeat 3x (Steps
R
thru
Continue to Sanitation – Step
AMMONIA
Cleaners
DOWNLOAD COMPLETE
INSTRUCTION MANUAL:
hoshizakiamerica.com/manuals
Type in the model number of your
icemaker (including dashes) to
download manuals
#51008 | 9.15.2016
to OFF, then turn off
.
to WASH, and the
control
service switch
to WASH, and
control
to rinse thoroughly.
on front...
Scoop
Dish soap, rinse well
Water Filters
Check psi, change if req'd
Exterior
Dish soap & damp cloth
Bin Door/Top Kit
Warm water & clean cloth
Icemaker/Bin
Follow these instructions
Water Supply Inlet
Clean inlet screen
Condenser
Inspect. Clean with brush
Water Hoses
Inspect. Replace if req'd
Tech Support: 1.800.233.1940
After
30 min.
After
2 min.
After 3 min.
After 5 min.
After 2 min.
ATTENTION!
DO NOT use
ammonia type
cleaners. Can cause
damage to icemaker
WEAR liquid-proof
gloves and goggles to
protect skin & eyes
from cleaning &
sanitizing chemicals
sanitizing continued...
RINSE 1:
(Steps 20-22)
Move
control switch
to ICE,
replace front panel
After 3 minutes, remove the
front panel
Move
service switch
to WASH
and
control switch
to SERVICE,
replace the front panel
After 5 minutes, remove the
front panel
Move
service switch
to DRAIN,
replace the front panel
After 2 minutes, remove
the front panel
Move
control switch
to OFF,
replace the front panel
RINSE 2:
Repeat RINSE 1 (Steps 20–22)
for complete ice/food safety
Clean the dispenser unit /
ice storage bin liner with a
neutral cleaner (dish soap)
Rinse thoroughly
Move
control switch
to ICE,
replace front panel
ATTENTION!
IF ICEMAKER IS ON DISPENSER,
remember to turn on the dispenser
after cleaning
e
,
Page 21

Advertisement

loading