Hoshizaki KM-340MAH Manual page 10

Ice Machine
The ice maker must be cleaned & sanitized at least once a year.
Cleaning Prep:
R Remove the Front Panel, move the control switch to OFF.
1
After 3 min., move the switch to ICE, then replace the panel. A
After 3 min., remove the Front Panel, move the switch to OFF. A
2
Remove all ice from the ice storage bin and/or dispenser
3 R
WARNING! IF ON DISPENSER, turn off the dispenser power
supply after dispensing all the leftover ice.
Cleaning:
4 R Remove the Front Insulation Panel, Cube Guide B & A, Overflow Cap & Pipe,
Water Shield, and Drain Plug. After the water tank has drained, replace all items.
NOTICE! DO NOT cross thread the drain plug or
overflow pipe.
R Refill water tank by moving the control switch to ICE,
5
replace the Front Panel. After 3 minutes, remove Front
Panel, move switch to the OFF position.
R Remove the Front Insulation Panels. Pour 14 fl.oz
6
( (414 ml) of Hoshizaki Scale Away into the water
tank. Replace the front insulation panel. Turn the
cleaning valve left until completely vertical (open).
NOTICE! AVOID EXCESSIVE FOAMING, wait 1
minute before next step.
M Move the control switch to WASH, replace Front Panel.
7
NOTICE! DO NOT leave the control switch on WASH for extended periods when
water tank is empty. It will damage water pump seals.
#51004 | 7.22.2016
Page 10
Cleaning & Sanitizing
Front View of Ice Maker
Tech Support: 1.800.233.1940
3
min
.
3
min.
3
min.
OPEN
continued on the back...
KMD-850MAH, MWH, MRH
KMD-901MAH, MWH, MRH
WARNING!
DO NOT leave icemaker
unattended when panels are off
AMMONIA
Cleaners
Sanitizing:
Fill the water tank
CLOSE the cleaning valve
Move control switch to ICE,
replace the front panel
After 3 minutes, remove the
front panel
Move control switch to OFF
Remove the front insulation
panel
Pour .78 fl. oz (23 ml) of
chlorine bleach* into the
water tank
Replace the front insulation
panel
OPEN the cleaning valve
* Use bleach without additives.
Additives cause excessive foaming, and
reduces effectiveness of the cleaning.
Wait 1 minute to avoid
excessive foaming
Move control switch to WASH,
replace the front panel
After 45 minutes, remove
the front panel
Remove the front panel
Move the control switch to OFF
Remove the front insulation
panel, cube guide B & A,
overflow cap & pipe, water
shield, and drain plug
After the water tank has
drained, replace all items
14
n 15
16
17
n
18