Perform Initial Tasks - Juniper Mesa 3 Owner's Manual

Perform Initial Tasks

When you receive your Mesa 3, perform the tasks outlined in
this section before first use.
Review Documentation
Documents like release notes, quick start guides, manuals,
certification information, and accessory instructions are
available on our website at:
mesa-3/documentation.
another computer with an internet connection.
Documents will be updated during the life of the Mesa
3. Compare version numbers to see if a document has
changed.
Install the Battery Pack, Micro SD Card, and Micro SIM
Card
The Mesa 3 comes with a rechargeable, removable Li-
Ion battery pack. Install and charge the battery pack as
follows:
1. The battery compartment is accessed from the back of
the tablet. Push the battery lock switch in, slide it to the
unlocked position, and remove the door.
!
CAUTION: The Mesa 3 is not sealed against water and
dust when the battery door is not installed.
2. If you are using a micro SD card for additional memory
or a micro SIM card for cellular data, you can install
them now before you install the battery pack or at
another time. If you do this, make sure you replace the
flexible card retainer before installation of the battery.
See Chapter 2, Standard Features, SD Cards for more
details.
4
Mesa 3 Rugged Tablet Powered by Android
www.junipersys.com/support/
View information on the Mesa 3 or