Mesa 3 Vehicle Dock - Juniper Mesa 3 Owner's Manual

Ethernet Specifications
10/100/1000 Mbps twisted-pair Ethernet
„
IEEE802.3/802.3u/802.3ab 10BASE-T, 100BASE-TX, and
„
1000BASE-T
Manages twisted pair crossover detection and correction
„
Full-duplex and half-duplex capability (only full-duplex
„
operation at 1000 Mbps)
Maintenance and Environmental Issues
The dock is intended for indoor use only.
„
Temperatures should be between 0°C to 50°C.
„
Avoid using the dock in situations where water can enter
„
the connector ports. It is not sealed against water and
must be kept dry.
Do not touch the docking pins with conductive items
„
when power is applied to the dock.
Do not drop items on the dock that can damage the
„
docking pins.
Keep debris off of the docking pins.
„
The Mesa 3 docking pin contacts are always powered
„
on when it is docked. If you are using the Mesa 3 in a
potentially corrosive location when it is not docked, the
pin contacts can be turned off in Settings > Doc Control.

Mesa 3 Vehicle Dock

The Vehicle Dock is part of a mounting system that provides
the Mesa 3 with a method to be secured in a vehicle or
other mobile mounting application.
32
Mesa 3 Rugged Tablet Powered by Android