Certifications And Standards - Juniper Mesa 3 Owner's Manual

Improper battery use may result in a fire, explosion or other
hazard.
Keep the battery away from excessive heat and direct
sunlight. Do not place it on heating devices such as
microwave ovens, stoves, or radiators.
Battery may explode if overheated.
This product could contain a built-in battery that must be
removed by a specialist.
!
CAUTION: Risk of explosion if the battery is replaced by an
incorrect type.
Wall Charger Warnings
! WARNING! To reduce the risk of personal injury, electrical
shock, fire or damage to the equipment:
Plug the wall charger into an electrical outlet that is easily
accessible at all times.
Do not place anything on the wall charger cord or any
of the other cables. Arrange them so that no one may
accidentally step on or trip over them.
Do not pull on a cord or cable. When unplugging the wall
charger from the electrical outlet, pull on the plug, not the
cord.
The AC wall charger must be approved by Juniper Systems,
have an output rating of 12 VDC and a minimum 2.5 A,
and be certified or listed by a nationally recognized testing
laboratory. The AC wall charger provided with the Mesa 3
meets these criteria. Using any other external power source
can damage your product and void your warranty.
Certifications and Standards
There are North American and European Union versions of
the Mesa 3, with different certifications and standards.
Note: Optional accessories like the Office Docking Station
do not go through certification testing and are ordered
separately.
47
Appendix C Warnings, Regulatory Information, Licensing