Recycling The Mesa 3 And Batteries - Juniper Mesa 3 Owner's Manual

Cleaning the Mesa 3
Make sure the battery door is securely installed. Remove
the screen protector if you want to clean underneath it.
Use warm water, a mild cleaning solution, and a soft bristle
brush to gently clean the Mesa 3.
!
CAUTION: Do not direct a high-pressure stream of water
at the device to clean it. This action could break the seal,
causing water to get inside the device and voiding the
warranty.
!
CAUTION: Exposure to some cleaning solutions may
damage your device, including automotive brake cleaner,
isopropyl alcohol, carburetor cleaner, and similar solutions.
If you are uncertain about the strength or effect of a
cleaner, apply a small amount to a less visible location as a
test. If any visual change becomes apparent, promptly rinse
and wash with a known mild cleaning solution or with water.

Recycling the Mesa 3 and Batteries

When the Mesa 3 and Li-Ion battery packs for your Mesa
3 reach the end of their service life, they must not be
disposed of with municipal waste. It is your responsibility to
dispose of your waste equipment by handing it over to a
designated collection point for the recycling of electrical
and electronic equipment.
Appendix A Storage, Maintenance, and Recycling
37