Juniper Mesa 3 Owner's Manual page 37

Vehicle Dock Features:
A locking mechanism with a unique key (duplicates can
„
be made for fleets)
Powered dock: 12 VDC power port, vehicle charger, and
„
USB 2.0 port (host)
Non-powered dock option
„
Four holes and screws for attachment to a mounting
„
system
1 2
Mounting System
The Vehicle Dock does not attach directly to a vehicle.
The dock attaches to any 30mm x 38mm AMPS mounting
system that suits your application (sold separately). We
recommend products from RAM Mounts (rammount.com) or
ProClip (proclipusa.com).
How to Use the Dock
1. Attach the mounting system to the vehicle. For a
powered dock, plug the 12 V charging cable into the
vehicle power port, and then into the dock.
2. If a hand strap is covering the pin contacts on the Mesa
3, unhook one end or remove it.
3. Hold the Mesa 3 horizontally with the docking pin
contacts facing down. Place it over the dock alignment
pins and press down until you feel and hear the lock
engage.
4. Press the lock bar down until it engages the Mesa 3.
5. Push the lock button in. The Mesa 3 is now locked in the
dock and cannot be accidentally removed.
6. To remove the Mesa 3, turn the key until the lock button
pops out. Lift the lock bar, and remove the Mesa 3.
3
Chapter 3 Optional Features and Accessories
1 Power Input Jack
2 USB Port, Host
3 Lock Bar with Key
33