Sensors; Bluetooth ® Wireless Communication - Juniper Mesa 3 Owner's Manual

USB-C hub can be plugged in, providing ethernet and
multiple USB 3 ports.
Note: The Mesa 3 does not charge through the USB-C
port.

Sensors

Compass, Gyroscope, and Accelerometer
The Mesa 3 has a built-in compass, gyroscope, and
accelerometer. The accelerometer assists the compass in
determining direction, even when the device is not resting
flat. The gyroscope senses change in angular motion. The
compass, accelerometer, and gyroscope can also be used
by other user applications. The compass and gyroscope
have been factory calibrated.
Bluetooth Wireless Communication
®
To create a partnership between the Mesa 3 and another
device with Bluetooth technology, follow these steps:
1. Turn both devices on.
2. Place them within a few feet of each other. (The Mesa
has long range Bluetooth technology, but the other
device might not.)
3. Make Bluetooth technology discoverable on both
devices. It is off on the Mesa 3 by default. You can
quickly check on the status by swiping down from
the top of the screen to view the Quick Settings. If the
Bluetooth icon is gray, it is off. Tap and release the icon
to turn it on. The icon turns green. (You can also toggle it
on and off in Settings).
4. Touch and hold the Bluetooth icon to open Connected
Devices in Settings. Select Connection preferences >
Bluetooth. Select Pair new device. A list of discoverable
devices is shown. Tap on the name of the device in the
list you want to pair with. A Bluetooth device pairing
request box is shown. If prompted, enter the PIN or pass
code of the device you want to pair with. The devices
should now be paired.
Chapter 2 Standard Features
17