Camera; 4G Lte Data Modem - Juniper Mesa 3 Owner's Manual

Location Services provides a standard way for GPS/GNSS
information to be made available to applications that
have been designed using the Android Location Services
application programming interfaces (APIs). GPS is always
on by default and cannot be turned off. To select your
desired configuration of GNSS satellite constellations, go to
Settings > GNSS Settings.
GPS/GNSS Accuracy
The GPS/GNSS antenna is located at the top of the Mesa
3 above the ambient light sensor when it is held in portrait
view. It is intended to work in both portrait view and
landscape view. Do not put your hand or another object
over this area. Accuracy could be reduced. The more items
between the antenna and the satellites, the lower the
accuracy.

Camera

The Mesa 3 has a front facing camera that is 2 MP and a
rear facing camera that is 16 MP.
By default the camera application can be accessed by
quickly pressing the hardware power button twice. It
can also be found in the apps list and can be placed on
the Home screen. Still images and videos can be captured
from the camera application. Other options such as timer,
flash, and switching between front and back cameras
are available. More options are shown in settings such as
location tagging, aspect ratio, and image resolution.

4G LTE Data Modem

The 4G LTE data modem provides Wireless Wide Area
Network data modem capability.
This modem supports service providers in North America,
Europe, and many other regions of the world. It is multi-
carrier capable. Refer to frequency bands and modes
supported by the Mesa 3 located in Appendix D,
Specifications, and your service provider of choice for
compatibility.
19
Chapter 2 Standard Features