Juniper Mesa 3 Owner's Manual page 24

Set up a Data Account with a Wireless Provider
Contact a wireless provider to set up data service for the
cellular data modem and obtain an account and micro SIM
card. Provide the following information:
1. Billing Information and business ID, such as your Federal
Tax ID or VAT number.
2. The wireless services required. You only need data
service. You do not need voice or messaging services.
3. You may be asked for the modem's IMEI number. Go to
Settings > About Tablet to see the IMEI number.
Install the SIM Card
The card slot and flexible card holder are designed to
hold the card securely in place so it will not come out or
disconnect if the tablet is dropped. To insert or remove a
card, follow these steps:
1. Power off the tablet.
2. Remove the battery door and battery pack as outlined
in Chapter 1.
!
CAUTION: The Mesa 3 is not sealed against water and
dust when the battery door is not installed properly.
3. An image on the battery compartment label shows the
correct location and orientation for the SIM card. Pull
the flexible card holder back out of the way. Push the
card into the slot to insert it.
4. Push the flexible card holder back into place, covering
the card slots.
5. Replace the battery pack, and attach the battery door.
To remove the SIM card, gently pull it out with tweezers or a
piece of tape.
20
Mesa 3 Rugged Tablet Powered by Android
SIM Card Slot
Flexible
Card Holder