Perform Initial Tasks; Review Documentation; Charge And Install The Battery Packs - Juniper Mesa Pro User Manual

Hide thumbs Also See for Mesa Pro:

Table of Contents

1.3 Perform Initial Tasks

When you receive your Mesa Pro, perform the tasks outlined in

this section before first use.

This user's manual and other documents like release notes are

available on our website:

pro/documentation.

desired, either on the Mesa Pro or another computer with an

internet connection.

The Mesa Pro comes with one or two rechargeable and

removable Li-ion battery packs (depending on the configuration).

CAUTION: The Mesa Pro must have at least one battery

installed to operate.

To install and charge the battery packs:

The battery compartment is accessed from the back of

the tablet. Push the battery door latch in, slide it left to the

unlocked position, and remove the door.

CAUTION: The Mesa Pro is not sealed against water and dust

when the battery door is not installed.

2. If you are using an SD card for additional memory or a SIM

card with the 4G LTE data modem (optional), you can install

them now before you install the battery packs or at another

time. If you do this, make sure you replace the card holder

before battery installation. See

Cards on page 21

https://junipersys.com/support/mesa-

View, download, and print documents as

2.7 Micro SD and Nano SIM

for details.

1 Getting Started

Table of Contents