Reset; Hreset - Motorola PPC/CPCI-690 Reference Manual

PowerBoot

Reset

hreset

D
ESCRIPTION
S
YNTAX
P
ARAMETERS
E
XAMPLE
PPC/CPCI-690
The following commands are used to perform either a hardware or a soft-
ware reset.
Command to initiate a hardware reset of the board.
hreset
None
PowerBoot> hreset
Init GT MPSC0 as UART
Copy ROM to RAM
Started at phys. address: 0x1ff80000
Init DTLB/ITLB for block translation, enable MMU
Init L1-Icache
Init L1-Dcache
Init L2-Cache
Found IBM750FX at 667 MHz
Init exception vectors starting at address: 0x00000100
Onboard SDRAM
Init device library
Discovery.0 is /
PCI.1 is /PCI@1
PCI.0 is /PCI@0
CompactPCI.0 is /PCI@0/CompactPCI@20
Ethernet 1:0080:42:11:67:C1
Ethernet 2:0080:42:11:67:C2
Ethernet 3:0080:42:11:67:C3
Found RTB-602
<<PowerBoot V4.00 for PowerCoreCPCI CPCI-690>>
<< c by FORCE COMPUTERS
<< (This is a nonreleased Version of
<< PowerBoot for PowerCore) >>
PowerBoot>
: 512MB RAM
>>
>>
Command Set
4 - 47