Motorola PPC/CPCI-690 Reference Manual page 98

Command Set
setboot
D
ESCRIPTION
S
YNTAX
P
ARAMETERS
E
XAMPLE
4 - 24
Command to set boot options.
setboot
None
PowerBoot> setboot
-General Boot Parameters-
Boot select [0=Net,1=Go,2=Flash+Copy,3=ATA-IDE (0) :
Auto boot [0=disable, 1=enable], (0) :
Auto boot delay [0..99s], (0) :
Load address (00000000) :
Boot address (00000000) :
-TFTP Ethernet/SCSI/ATA-IDE boot file parameters-
Ethernet 1, 2 or 3 : (0) :
Additional tftp retries (00000000):
RARP [1] or ARP [2] protocol : (1) :
Server-IP# [aaa.bbb.ccc.ddd] :
Target-IP# [aaa.bbb.ccc.ddd] :
Select bootdisk (0) :
TFTP/SCSI/ATA-IDE Boot file name :
:
-PCI-to-PCI bridge host-mode parameters-
Compact PCIbus probe list [8,7,6,5,4,3,2] (8,7,6,5,4,3,2) :
-Power On Self Test (POST) parameters-
Power ON Self Test POST [1=disable, 0=enable], (0)
-Primary Booter parameters [FORCE internal use only]-
Primary Booter [0=disable, 1=enable], (0)
Watchdog during booting (0) :
Enable ECC checking (0) :
Enable Shared Memory Serial (0):
CSUM : 0xCEE
PowerBoot>
:
:
:
PowerBoot
:
PPC/CPCI-690