Motorola PPC/CPCI-690 Reference Manual page 19

PPC/CPCI-690
Order No. Revision
222176 AA
223827 AA
227356 AA
227356 AB
227356 AC
Date Description
March 2004 Added information on 750GX CPU to
"About this Manual" page 1-3; updated
Table 2 "Ordering Information Excerpt"
page 1-7; added power requirements for
750GX boards to "Power Requirements"
page 2-6; renamed section "Voltage Key"
to "Signaling Level" page 2-9 and modi-
fied it; added step regarding PMC module
voltage key position to "Installation Proce-
dure" page 2-9; changed "power-on test"
and "POT" to "power-on self test" and
"POST" throughout the PowerBoot chap-
ter; corrected syntax and/or command
description of the following commands:
"bt" page 4-15, "cache" page 4-21,
"userled" page 4-26, "temp" page 4-34,
"config_wr" page 4-36, "eeprom_read"
page 4-37, "eeprom_write" page 4-38,
"fprog" page 4-39, "netload" page 4-43,
"netsave" page 4-45, "bs" page 4-50,
"ferase" page 4-52; changed examples 1-3
on page 4-43; changed example screen out-
put in "help" page 4-31; added informa-
tion on 750GX CPU to "PPC Bus" page 5-
6; modified section "Memory Bus" page 5-
7; added 750GX CPU to section "Interrupt
Map" page 6-6
Editorial changes
July 2004 Replaced IPMI firmware update procedure
in "ipmi_flsupd" with reference to IPMI
Firmware for PPC/CPCI-690 and PPC/CPCI-
695 Installation Guide, updated "Other
Sources of Information", editorial changes
September Brought manual to Motorola-style (copy-
2005 right, logo etc.); updated description of
PowerBoot commands netload and net-
save.
January 2006 Corrected P/N number on titlepage. It is
now: 227356.
June 2006 Corrected board power consumption val-
ues in section Installation->Requirements-
>Power Requirements
xix