Behave (Bluetooth Headset Connection Type) - Kenwood NX-5000 Series Common Function Reference

10 BLUETOOTH COMMUNICATION
10.5 About Headset Profile (HSP Connection/ HSP Disconnection)
When a Pairing Cannot Occur with the Bluetooth-compatible Device or the
Bluetooth-compatible Device Does Not Behave (Bluetooth Headset Connection
Type)
An appropriate Headset Profile connection sequence exists for each of the Bluetooth-compatible devices (headsets) to be
connected with the transceiver by using Headset Profile. For the transceiver, an appropriate Headset Profile connection
sequence needs to be configured in Bluetooth Headset Connection Type according to the Bluetooth-compatible device
to be used.
By using KPG-D1/ D1N, Bluetooth Headset Connection Type can be configured.
The following Bluetooth-compatible devices are guaranteed to behave properly.
Configuration
The following Bluetooth-compatible devices can be used normally:
Manufactured by Plantronics:
Manufactured by Pryme:
Headset 1 Manufactured by 3M:
Manufactured by Sensear:
Manufactured by Savox:
The following Bluetooth-compatible devices can be used normally:
Manufactured by Plantronics:
Manufactured by Pryme:
Headset 2
Manufactured by 3M:
Manufactured by Sensear:
Also, the Headset Profile connection sequence can be changed by selecting "Headset 1" or "Headset 2" after placing the
transceiver in Menu Mode by pressing the Menu key and executing "Bluetooth Headset Connection Type".
(Refer to Using Menu Mode.)
Note
Bluetooth-compatible devices with different connection sequences may not be connected even if either "Headset 1" or
"Headset 2" is configured in Bluetooth Headset Connection Type.
Common FUNC (K, F)/Ver 2.20
Table 10-8 Bluetooth Headset Connection Type
Voyager Legend
BTH-LMIC
BTH-300
BTH-600
Peltor WS Headset XP
Peltor WS ProTac XP
SM1x Smart Muff-HB
SPx Smart Plug
BTR-155 Radio (K551061)
Voyager Legend
BT-LMIC
BTH-LMIC
Peltor WS Headset XP
Peltor WS ProTac XP
SM1x Smart Muff-HB
SPx Smart Plug
Description
CONTENTS
199
INDEX