Kenwood NX-5000 Series Common Function Reference page 450

19 CONFIGURATION FOR EACH FUNCTION
19.3 Available Functions for the Selector
Function Name
Analog Conventional:
The transceiver opens squelch and unmutes the speaker.
P25 Conventional:
The transceiver disables the NAC and unmutes the speaker upon
detection of a frame.
NXDN Conventional:
Squelch Off
The transceiver resets the matching state of RAN code and
Optional Signaling and unmutes the speaker upon detection of an
NXDN frame.
See
0
0
Enters Stack Mode. In Stack Mode, the data stored in the stack
memory of the transceiver, such as call records, Status Messages
and Short Messages, can be referred or cleared.
Stack
See
Viewing the Receive History (Stack)
Toggles the Surveillance between enabled and disabled. While the
Surveillance Surveillance function is enabled, the transceiver does not emit a
tone or light the backlight even when the transceiver functions.
Toggles the Talk Around between enabled and disabled.
See
0
Talk Around
0
Toggles the Vibrator between enabled and disabled.
Vibrator See
Using the Vibrator
Deletes all Encryption Key data stored in the SCM.
See
Zeroize
0
0
*1 ALL indicates that a function can be used in all the following communication systems:
Analog Conventional
0
P25 Conventional
0
P25 Trunking
0
NXDN Conventional
0
NXDN Trunking
0
DMR Conventional
0
Common FUNC (K, F)/Ver 2.20
Description
P25 FUNC Temporarily Disabling the Squelch (Squelch Off)
NXDN FUNC Temporarily Disabling the Squelch (Squelch Off)
P25 FUNC Communicating Without Using a Repeater (Talk
Around)
NXDN FUNC Communicating Without Using a Repeater (Talk
Around)
P25 FUNC Deleting all Encryption Keys (Zeroize)
NXDN FUNC Deleting All Encryption Keys (Zeroize)
Available Communication
Systems
Analog Conventional
P25 Conventional
NXDN Conventional
ALL
ALL
Analog Conventional
P25 Conventional
NXDN Conventional
ALL
P25 Conventional
P25 Trunking
NXDN Conventional
NXDN Trunking
CONTENTS INDEX
*1
419