Removing The Microsd Card - Kenwood NX-5000 Series Common Function Reference

9 STORING RECORDED AUDIO/ GPS DATA
9.1 About microSD Card
4
Press the Menu ([
The formatting starts after a Key Beep A (1 beep) sounds from the
transceiver.
Note
If the formatting fails, "Format Error" is displayed for 1 sec. Also, if the
" " icon appears before the formatting is executed, the "
appears.
When the formatting completes, "Complete" is displayed.
Configuration using KPG-D1/ D1N
Assigning functions to the PF keys on the transceiver (

Removing the microSD Card

In order to avoid damage to a file stored in a microSD card or to avoid failure of the transceiver, the recognition of the
microSD card needs to be reset in Eject SD Card Mode before removing the microSD card from the transceiver. If the
recognition of a microSD card is reset, the transceiver enters the state where the microSD card can be safely removed.
Pressing the Eject SD Card key places the transceiver in Eject SD Card Mode. Or, pressing the Menu key to enter Menu
Mode and then selecting "Eject SD Card" places the transceiver in Eject SD Card Mode. (Refer to
Operating the transceiver
1
Press the Eject SD Card
A Key Beep A (1 beep) sounds from the transceiver, and then the
transceiver enters Eject SD Card Mode.
The following operations are identical even if the transceiver enters Eject
SD Card Mode by pressing the Menu key.
2
Press the Menu ([
A Key Beep A (1 beep) sounds from the transceiver, and the screen to select whether to reset the recognition of the
microSD card appears.
Common FUNC (K, F)/Ver 2.20
]) or [ ] key.
key.
]) or [ ] key.
" icon
Transceiver Settings > Key Assignment)
CONTENTS
12 : 34 A
M
Z o n e 1
C h a n n e l 1
F o r m a t t i n g
M en u Zo ne+
12 : 34 A
M
Z o n e 1
C h a n n e l 1
C o m p l e t e
M en u Zo ne+
Using Menu Mode.)
12 : 34 A
M
Eject Card
T h e c a r d w i l l b e
u n a v a i l a b l e .
N ex t Bac k
155
INDEX