Registering A Bluetooth Connection Device (Pairing) - Kenwood NX-5000 Series Common Function Reference

16 MULTI RF DECK/ MULTI CONTROL HEAD
16.16 Bluetooth Communication
Checking the Bluetooth Device Name (Bluetooth Information)
In Bluetooth Information, the own Bluetooth device name configured for each RF Deck or KCH-20R can be confirmed on
the display. The displayed Bluetooth device name varies according to the configuration in Bluetooth Interface Selection
(RF Deck, Control Head).
0
RF Deck
By pressing the Menu key to enter Menu Mode, and then executing "Bluetooth Information", Bluetooth Information Mode
is entered. The Bluetooth device name configured for the Selected RF Deck can be confirmed.
0
Control Head
By pressing the Menu key to enter Menu Mode, and then executing "Bluetooth Information", Bluetooth Information Mode
is entered. The Bluetooth device name configured for the operated KCH-20R can be confirmed.
If any of KCH-19, KCH-20R, and KCH-21R coexist, and if the operated Control Head is KCH-19, a Key-entry Error Tone
sounds from the Control Head, and the Control Head does not respond.

Registering a Bluetooth Connection Device (Pairing)

An Bluetooth connection device can be registered for each RF Deck or KCH-20R. The pairing behavior varies according to
the configuration in Bluetooth Interface Selection (RF Deck, Control Head).
0
RF Deck
Pairing can be executed by selecting a detected Bluetooth-compatible device after entering Bluetooth Find Device Mode
or by pressing the Bluetooth Connect / Disconnect key.
When the Selected RF Deck receives a pairing request from a Bluetooth-compatible device, the Bluetooth device name
or Bluetooth device address of the Bluetooth-compatible device appears on the display, and whether to execute pairing
can be selected.
Once pairing completes, the device configuration is registered in the Selected RF Deck.
If the Unselected RF Deck receives a pairing request, the request is automatically rejected.
0
Control Head
Pairing can be executed by selecting a detected Bluetooth-compatible device after entering Bluetooth Find Device Mode
or by pressing the Bluetooth Connect / Disconnect key.
When KCH-20R receives a pairing request from a Bluetooth-compatible device, the Bluetooth device name or Bluetooth
device address of the Bluetooth-compatible device appears on the display, and whether to execute pairing can be
selected.
Once pairing completes, the device configuration is registered in the operated KCH-20R.
If the other KCH-20R receives a pairing request while KCH-20R of either Control Head 1 and Control Head 2 is executing
pairing, the request is automatically rejected.
If any of KCH-19, KCH-20R, and KCH-21R coexist, and if the operated Control Head is KCH-19, a Key-entry Error Tone
sounds from the Control Head, and the Control Head does not respond.
Common FUNC (K, F)/Ver 2.20
CONTENTS INDEX
308