External Speaker (Unselected Rf Deck Speaker) - Kenwood NX-5000 Series Common Function Reference

16 MULTI RF DECK/ MULTI CONTROL HEAD
16.7 Audio Function
Note
If a PC command for changing the volume is received from a D-sub 25-pin connector by using KAS-10, etc., only the
0
volume of the RF Deck to which the D-sub 25-pin connector is connected is changed. Both the Selected RF Deck and
the Unselected RF Deck behave the same way.
If the volume level of each RF Deck is different, when the volume of the Control Head configured in Master Volume Control
0
is changed, the volume of the Control Head applies to the volume levels of all RF Decks.
The volume of an RF Deck is controlled by the D/A Converter equipped in the RF Deck. Also, the volume of a Control
0
Head is controlled by the CODEC IC equipped in KCH-20R/ KRK-14H. In this way, the volume level of a Control Head
not configured in Master Volume Control can be changed individually.
Configuration using KPG-D1/ D1N
Configuring Master Volume Control (
Switching the Output Status of the External Speaker (Unselected RF Deck Speaker)
Unselected RF Deck Speaker is the function to switch the output status of the external speaker connected to the Unselected
RF Deck between Mute and Unmute. This function is used such as to listen to only the received audio of the Selected RF
Deck if the Selected RF Deck and Unselected RF Deck receive simultaneously.
One of the following key operations can switch the Unmute/ Mute status of the external speaker connected to the Unselected
RF Deck:
1. Pressing the Unselected RF Deck Speaker key switches the Unmute/ Mute status in Unselected RF Deck
Speaker.
2. Entering Menu Mode by pressing the Menu key, and then executing "Unselected RF Deck Speaker" can switch the
Unmute/ Mute status of the external speaker connected to the Unselected RF Deck.
The received audio of the
Selected RF Deck
Ext.
SP
RF Deck 1
(Selected RF
Deck)
Control Head
1
The received audio of the
Selected RF Deck
Configuration using KPG-D1/ D1N
Configuring Unselected RF Deck Speaker (
Others)
Common FUNC (K, F)/Ver 2.20
Transceiver Settings > Optional Features > Optional Features 1 > Others)
The received audio of the
Unselected RF Deck
Ext.
SP
RF Deck 2
(Unselected
RF Deck)
Control Head
2
The received audio of the
Selected RF Deck
Figure 16-40 Unselected RF Deck Speaker
Transceiver Settings > Optional Features > Optional Features 1 >
The received audio of the
Selected RF Deck
Ext.
SP
Mute
RF Deck 1
(Selected RF
Deck)
Unmute
Control Head
1
The received audio of the
Selected RF Deck
CONTENTS
* The received audio of the
Unselected RF Deck is not
emitted.
Ext.
SP
RF Deck 2
(Unselected
RF Deck)
Control Head
2
The received audio of the
Selected RF Deck
280
INDEX