Lighting The Backlight (Backlight) - Kenwood NX-5000 Series Common Function Reference

5 INDICATION AND DISPLAY

5.5 Lighting the Backlight (Backlight)

5.5 Lighting the Backlight (Backlight)
The backlight is equipped on the back side of the LCD on the transceiver. By lighting the backlight, the LCD can be viewed
in dark places or at night.
Pressing the Backlight key toggles the backlight between On and Off.
If Auto Backlight is enabled, the backlight lights when operating any key of the transceiver, or when receiving a call. The
conditions for lighting the backlight by the Auto Backlight function can be configured by using KPG-D1/ D1N.
0
PTT Press
If PTT Press is enabled, the backlight lights when the PTT switch is pressed.
0
Any Key Operation
If Any Key Operation is enabled, the backlight lights when any key other than the PTT switch is operated.
0
ID/Message Reception
If ID/Message Reception is enabled, the backlight lights when the transceiver receives the following various calls and
messages:
Table 5-1 List of Calls Lighting the Backlight when ID/Message Reception Is Enabled
Conventional
NXDN
Trunking
Conventional
P25
Trunking
Common FUNC (K, F)/Ver 2.20
Individual Call
Individual Call Acknowledge Request
Group Call
Paging Call
Status Message
Short Message
Individual Call
Individual Call (Message Trunked (Enhanced))
Group Call/ Broadcast Group Call
Group Call/ Broadcast Group Call (Message Trunked (Enhanced))
Paging Call
Status Message
Short Message
Individual Call
Group Call
Emergency Call
Individual Call (No Availability Check)
Individual Call (Availability Check)
Paging Call
Group Call/ Announcement Group/ Super Group Call
System Call
Telephone Call
Emergency Call
CONTENTS INDEX
91