17 STRUCTURING A MULTI RF DECK/ MULTI CONTROL HEAD
17.11 About Configuration Using KPG-D1/ D1N
Configuration in KPG-D1/ D1N If Control Heads Are Switched
1
Change the configuration of the Control Head in
Each Control Head to be used is configured in Control Head 1 and Control Head 2 of Control Head
Configuration.
Refer to step 2 to step 6 of
from here.
Common FUNC (K, F)/Ver 2.20
Product
Figure 17-86 Product Information
"Configuration in KPG-D1/ D1N if RF Decks Are
Information.
Switched" for the configuration procedures
CONTENTS
384
INDEX