Warning Tone - Kenwood NX-5000 Series Common Function Reference

6 SOUND
6.1 Tones that Sound When a User Operates the Transceiver or When the Transceiver Status Is Changed

Warning Tone

Warning Tone is a tone that sounds from the transceiver before or when the transceiver is disabled to transmit, when the
transceiver becomes unable to transmit, or when the transceiver attempts to transmit while the transceiver is unable to
transmit.
The volume level of Warning Tone can be configured using KPG-D1/ D1N. (Refer to
Tones (Tone Volume).)
Function
Warning Tone A
Warning Tone B
Warning Tone C
Battery Warning Tone
(Portable only)
TOT Pre-alert Tone
PLL Unlock Tone
Busy Tone
Busy Tone 2
Timed Power-off Pre-alert
Tone A (Mobile only)
Timed Power-off Pre-alert
Tone B (Mobile only)
Timed Power-off Pre-alert
Tone C (Mobile only)
Call Queue Tone
System Busy Tone
System Search Tone
System Search End Tone
System Select Tone
Call Invalid Tone
Invalid Dial Tone
Common FUNC (K, F)/Ver 2.20
Table 6-4 Warning Tone
This tone sounds from the transceiver while an unprogrammed channel is selected.
This tone sounds from the transceiver until the PTT switch is released if the transmission is
terminated by the Time-out Timer, or if the transceiver cannot transmit.
This tone sounds from the transceiver until the PTT switch is released if Busy Channel
Lockout is activated in an Analog Conventional, P25 Conventional and NXDN Conventional
system.
This tone sounds from the transceiver when the VOX transmission is terminated by Time-
out Timer.
This tone sounds from the transceiver when the automatic transmission is terminated by
Time-out Timer.
This tone sounds from the transceiver when the Battery voltage level drops to the adjusted
reduced-voltage level. (Refer to
Warning).)
This tone sounds from the transceiver when the transmit inhibit period configured in Time-
out Timer is about to expire.
This tone sounds from the transceiver when PLL is unlocked.
This tone sounds from the transceiver if data cannot be sent by pressing the PTT switch
since the channel is busy.
This tone sounds from the transceiver if data communication is disabled since the channel
is busy.
This tone sounds from the transceiver when the transceiver receives a response message
from the system that notifies of the busy state of the receiving transceiver in an NXDN
Trunking system.
This tone sounds from the transceiver 1 min before the time preconfigured in Timed Power-
off.
This tone sounds from the transceiver 10 sec before the time preconfigured in Timed
Power-off.
This tone sounds from the transceiver 2 sec before the time preconfigured in Timed Power-
off.
This tone sounds from the transceiver when the transceiver receives a response message
from the system that indicates a queued state in an NXDN Trunking system or P25 Trunking
system.
This tone sounds from the transceiver when the transceiver receives a response message
from the system indicating that no traffic channel is available in an NXDN Trunking system.
This tone sounds from the transceiver when the transceiver initiates System Search and
changes the system in an LTR Trunking system.
This tone sounds from the transceiver when there is no repeater that can connect by using
System Search in an LTR Trunking system.
This tone sounds from the transceiver when the transceiver finds an available system by
using System Auto Select and registration is successful in an NXDN Trunking system.
This tone sounds from the transceiver when the transceiver searches for the repeaters that can
be synchronized and a synchronized Personality is found in a DMR Conventional system.
This tone sounds from the transceiver when the transceiver receives from the system a
response message, such as a response message that service is disabled, in an NXDN
Trunking system or P25 Trunking system.
While sending a Telephone Call in a P25 Trunking system, this tone sounds from the
transceiver when the transceiver receives from the system a response message that service
is disabled (Reason Code: $40 or $42).
Configuring the Volume Level of Various
Description
Warning that the Battery Voltage Is Low (Battery
CONTENTS
109
INDEX