Inhibiting Transceiver Behaviors By Remote Control (Inhibit/ Stun) - Kenwood NX-5000 Series Common Function Reference

Hide thumbs Also See for NX-5000 Series:
Table of Contents

Advertisement

16 MULTI RF DECK/ MULTI CONTROL HEAD

16.8 Inhibiting Transceiver Behaviors by Remote Control (Inhibit/ Stun)

16.8
Inhibiting Transceiver Behaviors by Remote Control (Inhibit/
Stun)
Inhibit/ Stun is the function to inhibit transceiver behaviors by remote control. This function is used to prevent the
unauthorized use by a third party when the transceiver is stolen or lost.
This section describes behaviors unique to a Multi RF Deck/ Multi Control Head structure.
In a Multi RF Deck/ Multi Control Head structure, the system is operated by multiple protocols. The following are the Inhibit/
Stun behaviors under each condition:
Multi RF Deck (P25/ MDC-1200)
In Multi RF Deck operation, if any RF Deck receives an Inhibit request message, regardless of whether the RF Deck is the
Selected RF Deck or not, all RF Decks enter the Inhibit state. If any RF Deck receives an Uninhibit request message, all
RF Decks exit the Inhibit state.
Multi RF Deck (NXDN/ DMR/ FleetSync/ DTMF)
In Multi RF Deck operation, if any RF Deck receives a Stun/ Kill request message, regardless of whether the RF Deck is
the Selected RF Deck or not, all RF Decks enter the Stun/ Kill state. If any of the RF Decks receives a Revive request
message, all RF Decks exit the Stun state.
Multi RF Deck (mix of P25 and NXDN)
In Multi RF Deck operation, if any RF Deck operated in P25 receives an Inhibit request message, regardless of whether the
RF Deck is the Selected RF Deck or not, all RF Decks, including RF Decks operated in NXDN, enter the Inhibit state. If any
RF Deck operated in P25 receives an Uninhibit request message, all RF Decks exit the Inhibit state.
The opposite is the same, if any RF Deck operated in NXDN receives a Stun/ Kill request message, all RF Decks, including
RF Decks operated in P25, enter the Stun/ Kill state. The recovery conditions are also the same. If any RF Deck operated
in NXDN receives an Uninhibit request message, all RF Decks exit the Inhibit state.
Common FUNC (K, F)/Ver 2.20
External
External
Speaker
Speaker
Stun
Stun
Stun
RF Deck 1
RF Deck 2
P25
P25
(Selected RF
(Unselected RF
Deck)
Deck)
KRK-15B
KRK-15B
KRK-14H
Basic Panel
Mic
Figure 16-57 Inhibit/ Stun
External
Speaker
Stun
RF Deck 3
NXDN
(Unselected RF
Deck)
KRK-15B
KRK-14H
Basic Panel
Mic
CONTENTS
INDEX
295

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nx-5400Nx-5800Nx-5200Nx-5700Nx-5900Nx-5300

Table of Contents