Siemens SCALANCE WLC711 Maintenance Manual page 70

3 Click the Controlled Upgrade tab.
Note
The Controlled Upgrade tab will appear only when the Upgrade Behavior is set to Upgrade when AP
connects using settings from Controlled Upgrade on the AP Software Maintenance tab.
4 In the Select AP Platform drop-down list, click the type of AP you want to upgrade.
5 In the Select an image to use drop-down list, click the software image you want to use for the
upgrade.
6 In the list of registered Wireless APs, select the checkbox for each Wireless AP to be upgraded with
the selected software image.
7 Click Apply AP image version. The selected software image is displayed in the Upgrade To column
of the list.
8 To save the software upgrade strategy to be run later, click Save for later.
9 To run the software upgrade immediately, click Upgrade Now. The selected Wireless AP reboots,
and the new software version is loaded.
SCALANCE WLC711 Maintenance Guide
Maintaining the Wireless AP Software
Defining Parameters for a Software Upgrade
70