Siemens SCALANCE WLC711 Maintenance Manual page 62

2 In the left pane, click Network > SNMP.
The SNMP Common Settings screen is displayed.
3 In the SNMP v3 section, select a user account.
4 Click Edit Selected User.
5 In the Authentication Protocol drop-down list, select the authentication protocol: MD5, SHA.
6 In Authentication Password, type the password, which must be at least eight characters long. If
desired, click Unmask to display the password in plain text.
7 In the Privacy Protocol drop-down list, select the encryption protocol: DES.
8 In Privacy Password, type the password, which must be at least eight characters long. If desired,
click Unmask to display the password in plain text.
9 Click OK to save the user account information.
The SNMP Common Settings screen is displayed.
10 To save your changes, click Save.
Deleting SNMPv3 User Accounts
To Delete SNMPv3 User Accounts:
1 From the top menu, click Wireless Controller.
The Wireless Controller Configuration screen is displayed.
SCALANCE WLC711 Maintenance Guide
Using Controller Utilities
Deleting SNMPv3 User Accounts
62