Siemens SCALANCE WLC711 Maintenance Manual page 72

3 In the Telnet Access area, in the Password box, type the password for a Telnet session.
4 If using SSH, in the SSH Access area, in the Password box, type the password for SSH access.
5 To confirm the password, in the Confirm Password box, re-type the password.
6 To send the password information to all registered wireless APs, click Save.
Enabling Telnet/SSH on a Selected Wireless AP
To enable Telnet/SSH on a selected Wireless AP:
1 From the top menu, click Wireless AP. .
The Wireless AP Configuration screen appears
2 From the left pane, click APs > All.
3 In the AP list, click the wireless AP for which you want to enable telnet/SSH.
The Wireless AP Properties screen appears.
4 Click on the Advanced button.
5 From the Telnet/SSH Access drop-down list, click Enable.
6 Click Save. This wireless AP is enabled for a telnet/SSH session.
Disabling Telnet/SSH Access on a Selected AP
To disable Telnet/SSH access:
SCALANCE WLC711 Maintenance Guide
Performing Wireless AP Diagnostics
Enabling Telnet/SSH on a Selected Wireless AP
72