Siemens SCALANCE WLC711 Maintenance Manual page 31

To Copy an Existing Backup from a Flash to Local Storage Using the GUI:
9 From the top menu, click Wireless Controller.
The Wireless Controller Configuration screen is displayed.
10 From the left pane, click Administration > Software Maintenance.
The WLC Software tab is displayed.
11 Click the Restore tab.
12 Select a source Flash under Copy Backup File From. Flash has to be mounted for this.
13 In the Filename drop-down list, click the backup you want to transfer.
14 Click Copy.
The Software Maintenance window is displayed, providing the status and results of the operation.
The local backup copy is going to be displayed in Available Backups list as well.
To Copy an Existing Backup from a Flash to Local Storage Using the CLI:
15 Log into the system using SSH or console.
16 Copy the backup file from the local storage to flash using the following command:
WLC.siemens.com#copy configuration (to-local | to-flash | to-remote serveruser
dir [ftp password | scp password]) (from-local filename|number | from-flash
filename|number | from-remote server user dir file [ftp password | scp
password])
For example, to copy the backup file BAK.03122009.071327.zip locally from a flash:
WLC.siemens.com#copy configuration to-local from-flash BAK.
03122009.071327.zip
To see all backup files stored locally and on flash, use the show import command.
WLC.siemens.com#show import
1: BAK.03122009.071327.zip
2: BAK.03122009.071327.zip(flash)
SCALANCE WLC711 Maintenance Guide
Backing Up and Restoring the Configuration
Downloading a Backup File
31