Restoring The Backup Image From The Gui - Siemens SCALANCE WLC711 Maintenance Manual

12 If applicable, modify the FTP settings.
In the FTP menu, choose options from 2 to 7 to individually configure the FTP settings:
•
FTP server's IP address
•
FTP port
•
User name
•
Password
•
FTP directory
•
File Name
13 Upload the image on the FTP server:
a Type 11 in the FTP menu. The following screen is displayed:
Your choice: 11
Attempting to upload an image to the ftp server. Please be patient
Please verify at the ftp server that image has successfully been uploaded
<< Press any key to continue >>
Note
The minimum backup image size is approximately 250 MB.
You must have write permission for the FTP server and the specified FTP directory.
14 Confirm that the image is backed up.
Type 9 in the FTP menu. The following screen is displayed:
Your choice: 9
Currently Locally Stored Images:
--------------------------------
1 )
vps-09.01.01.0163-rescue-user.tgz
2 ) AC-MV-09.01.01.0163-1.
vps
<< Press any key to continue >>

Restoring the Backup Image from the GUI

The following section describes how to restore the backup image using the GUI.
To Restore the Wireless Controller Software:
1 From the top menu, click Wireless Controller.
The Wireless Controller Configuration screen is displayed.
SCALANCE WLC711 Maintenance Guide
Backing Up and Restoring the Image
Restoring the Backup Image from the GUI
15