Siemens SCALANCE WLC711 Maintenance Manual page 35

3 Select Remote.
The FTP/SCP server boxes are displayed.
4 Type the following:
•
Protocol – FTP or SCP.
•
Server – The IP address of the server to retrieve the image file from.
•
User ID – The user ID used to log into the server.
•
Password – The password for the user ID.
•
Confirm – The password to log on to the server. This field is to confirm you have typed the
correct password.
•
Directory – The directory on the server in which the image file that is to be retrieved is stored.
•
Filename – The name of the image file to retrieve.
5 In the Destination drop-down list, click Local or Flash to specify where the image is downloaded to.
6 Click Get Image now.
The Download Image window is displayed, providing the status and results of the download. The
image is downloaded onto your system and added to the Select upgrade list.
Note
SCP can only be used to download an image and cannot be used to start remote upgrade. The
Upgrade now button is disabled when SCP is selected from the drop-down list.
Upgrading Remotely
When you upgrade the wireless software remotely, the upgrade program upgrades the software image
by using the image file that is located on an external FTP server. The upgrade program downloads the
SCALANCE WLC711 Maintenance Guide
Upgrading the Wireless Convergence Software
Upgrading Remotely
35