Siemens SCALANCE WLC711 Maintenance Manual page 14

a Type 4 in the Rescue menu to configure the FTP Settings. The following screen is displayed:
FTP MENU
--------------
1) Enter FTP Settings
2) Change FTP server IP address
3) Change FTP port
4) Change user name
5) Change password
6) Change FTP directory
7) Change file name
8) Display current FTP Settings
9) Display locally stored images
10) Download Image from FTP server
11) Upload Image onto the FTP server
12) Remove locally stored images
B) Return back to the top menu
Your choice:
b Type 1 to enter the FTP settings.
c Type 1 in the FTP menu. The following screen is displayed.
Your choice: 1
Command syntax: ftp://<user>:<password>@<ftp_ip>:<port>/
<directory&filename>
~port information is optional: the default value is 21~
Please enter ftp info:
d Type the name of the image to be uploaded, as part of the FTP settings. For example:
Please enter FTP info:
ftp://tester:123456@192.168.10.10:21/backup_dir/
vps
-V8.31-rescue-user.tgz
Note
When you are uploading the backup image, the filename in the command syntax corresponds to
the image that is being uploaded to the FTP server (filenames can be displayed by typing 9 in
the FTP menu). When you are downloading the backup image, the filename in the command
syntax corresponds to a file that is being downloaded from the FTP server.
11 Check the FTP settings.
a Type 8 in the FTP menu. The following screen is displayed.
Your choice: 8
Current Settings:
-----------------
FTP IP address: 192.168.10.10 port: 21
user name: tester
password: 123456
FTP directory: "backup_dir"
FTP file: "
vps
-V8.31-rescue-user.tgz"
<< Press any key to continue >>
b Confirm that the name of the file to be uploaded to the FTP server is correct.
SCALANCE WLC711 Maintenance Guide
Backing Up and Restoring the Image
Backing Up the Current Image from Rescue Mode
14