Restoring The Backup Image From Rescue Mode - Siemens SCALANCE WLC711 Maintenance Manual

To Restore the Backup Image from Local Storage and Flash:
1 Locate the backup image from local storage and flash (if a flash device is inserted) using the
command. This command lists all upgrade files and backup image files.
upgrade
WLC.siemens.com
1: AC-MV-09.01.01.0123-1.
vps
2: -08.31.01.0192-rescue-user.tgz
2 Restore the backup image from the local storage or flash device using the
command. Make sure that you do not specify a
image-name
WLC.siemens.com
This command restores the system to the backup image selected.
To avoid typing the full image name, you can specify the image using the index returned by the
show upgrade command.
For example, the command below will install the image with index 2 which, in this case, is
vps
-08.31.01.0192-rescue-user.tgz.
WLC.siemens.com
To Restore the Local Image from the FTP or SCP Server:
3 Download the backup image from the FTP or SCP server by using the
userdirbackup-file-name [scpscp password]
For example, to download backup image
vps
-08.31.01.0192-rescue-user.tgz from an FTP server:
WLC.siemens.com
vps
-08.31.01.0192-rescue-user.tgz
4 Restore the backup image by using the
WLC.siemens.com

Restoring the Backup Image from Rescue Mode

To Restore the Backup Image from Rescue Mode:
1 Connect to the console port. Do not use the ESA port or the Admin management port. For more
information, see
2 Reboot the system.The following menu is displayed during the reboot process.
-------------------------------------------------------------
Controller
Controller rescue
------------------------------------------------------------
3 Use your cursor to highlight Controller rescue, and then press [Enter] to enter Rescue mode.
The following menu is displayed.
1) Force System Recovery
2) Create System Backup Image
SCALANCE WLC711 Maintenance Guide
# show upgrade
vps
# upgrade ac vps-08.31.01.0192-rescue-user.tgz
# upgrade ac 2
# copy upgrade 192.168.4.10 test system/backups
upgrade ac new-image-name
vps
# upgrade ac
Using the Console Port on page 45.
Backing Up and Restoring the Image
Restoring the Backup Image from Rescue Mode
bckto local
command.
-08.31.01.0192-rescue-user.tgz
show
upgrade ac backup-
option.
copy upgrade server
command.
18