Siemens SCALANCE WLC711 Maintenance Manual page 20

Reboot the system for changes to take effect.
Proceed with reboot (y/n):
8 Type y.
The wireless controller will reboot. After the reboot, the wireless controller restores the backed up
image with its original configuration.
To Restore from a Remote FTP Server:
9 On the Rescue menu, type 5.
The following menu is displayed:
1) Display Current Rescue Interface Info
2) Enter Interface Information
3) Change default gateway
4) Test interface by ICMP (ping)
B) Return back to the top menu
10 Configure the Network Interface. Type in the Network Interface menu, and then type the following:
•
IP address of your wireless controller management port
•
IP mask
•
IP address of Gateway
Your choice> 2
Please enter Interface information
Format <ip>:<netmask> <gw optional>
Input: 192.168.1.201:255.255.255.0 192.168.1.1
Configuring interface ...
Setting up network interface ...Done!
11 Type B to return to the top menu.
12 Type 4 in the top menu to configure the FTP settings.
The FTP menu is displayed.
1) Enter FTP Settings
2) Change FTP server IP address
3) Change FTP port
4) Change user name
5) Change password
6) Change FTP directory
7) Change file name
8) Display current FTP settings
9) Display locally stored images
10) Download image from FTP server
11) Upload image onto the FTP server
12) Remove locally stored images
B) Return back to the top menu
Your choice: 1
Command syntax: ftp://<user>:<password>@<ftp_ip>:<port>/<directory&file>
~port information is optional: the default value is 21~
Please enter ftp info:
13 Type the FTP information.
ftp://administrator:abc123@192.168.4.181/tester/v6/backup-rescue-user.tgz
SCALANCE WLC711 Maintenance Guide
Backing Up and Restoring the Image
Restoring the Backup Image from Rescue Mode
20