•
SNMPv2-MIB
•
IF-MIB
•
IEEE802dot11-MIB
•
RFC1213-MIB
The Siemens Enterprise MIB includes:
•
HIPATH-WIRELESS-EWC-MIB
•
HIPATH-WIRELESS-PRODUCTS-MIB
•
HIPATH-WIRELESS-SMI.my
•
HIPATH-WIRELESS-DOT11-EXTNS-MIB
•
HIPATH-WIRELESS-BRANCH-OFFICE-MIB
The MIB is provided for compilation into an external NMS. No support has been provided for automatic
device discovery by an external NMS.
The controller is the only point of SNMP access for the entire system. In effect, the controller proxies
sets, gets, and alarms from the associated wireless APs.
Enabling SNMPv1/v2c on the Wireless Controller
You can enable SNMPv1/v2c or SNMPv3 on the wireless controller to retrieve statistics and
configuration information.
For information on editing or deleting SNMPv3 user accounts, see
page 61 and
Deleting SNMPv3 User Accounts
To Enable SNMPv1/v2c Parameters:
1
From the top menu, click Wireless Controller.
The Wireless Controller Configuration screen is displayed.
SCALANCE WLC711 Maintenance Guide
Enabling SNMPv1/v2c on the Wireless Controller
Editing SNMPv3 User Accounts
on page 62.
Using Controller Utilities
on
57